booleansplit.com

photos, tips, tricks, and thoughts from an avid amateur photographer

 
 
 
 

Posts tagged lighting

2:07pm

2:07pm

Pentax K10D, Pentax SMC-A 50mm f/1.7 (manual focus), ISO 100, f/1.7, 1/800 sec, +0.7 EV, IS on

While my wife was doing a little shopping I wondered around 18th street in Homewood, AL and took a few photos. I used to work at the bike shop right down the street from here.

Designing Green 2009

Designing Green trophy

Pentax K10D, SMC PENTAX-DA f/3.5-5.6 18-55mm AL @ 18mm, ISO 160, f/4, 1/30 sec, +1 EV, IS on

Read all about Auburn University’s Department of Industrial and Graphic Design’s annual Designing Green competition on my personal blog.

Designed by Aran Mun, the hand-made laser cut cardboard trophy above was shot in a simple whitespace studio with a single incandescent bulb behind a white umbrella diffuser (reversed from the set-up shown below):

RAW file processed in Adobe Lightroom to correct white balance and tweak the exposure slightly. I shot another version at f/8…

imgp9983

…but I preferred the way the vignetting and shallower DoF in the f/4 shot really adds depth to the photograph and focuses your attention on the logo. Best thing about having access to a studio like this is that the total time to set up for this shot and snap the four frames I took was less than 2 minutes!

Click here if you’re just interrested in seeing all the photos I took during the event.

PMA bound

pma_gear1
Tomorrow evening I fly out to Vegas for 3 days at the Photo Marketing Association’s (PMA) 2009 trade show. I’m all geared up with my Pentax K10D, new SanDisk 8GB Extreme III SDHC card and ExpressCard reader, custom printed business cards, and press badge. Unfortunately, my extra battery and battery grip look like they won’t get here in time. Shame.

I’m sure there will be plenty of coverage for the big name products. Rather than just add to the noise, my plan is to blog about the products I find most interesting. Hopefully this will add a slightly different perspective to the show coverage than the typical mainstream media coverage. Of course I’ll probably get caught up in any big announcements just like everyone else but I’ll do my best to find a unique angle to cover. Check back often for updates throughout the week.

BTW, thanks to the snow today for providing nice flat whitespace studio-like lighting for this shot:

snow studio

Making lemonade out of lemons, my friends ;-)

Christmas table centerpiece photo

Christmas centerpiece arrangement

My father in-law asked me to take a picture of his Christmas table centerpiece arrangement so he could e-mail it to an out of town friend. My attempt at a quick snapshot didn’t meet my with my photographic standards so I spent the next hour playing with lighting to get the final shot above. This was a very challenging shot as I had to make do with what lighting I could find in the house. Here’s how I did it:

first shot with ambient light only

First of all, my in-laws’ house is DARK. Dark walls. Dark floors. Dark furniture. Dark lamps. You get the idea. Plus, it was night so the wall of windows to the left of the subject weren’t helping. Of course, I could have waited for morning but I always like a good challenge. Plus, I figured that if I got it right, a night shot would better capture the elegant and rich warmth of the table setting.

My first test shot was attampted with nothing but the incandescent  lamp light filtering in from the living room behind the camera. This required a 6 second exposure at f/8 and ISO 400 (a tripod was used so my K10D’s IS was OFF). I used f/8 to ensure that the entire arrangement was in sharp focus while the background was blurred a bit. I like the f/8 shot because there is enough background detail to clearly place this shot in my in-laws dining room while the subject focus was nicely isolated. The lighting in this first shot was too flat. I wanted more subject isolation so I grabbed a floor lamp and placed it to the left of the camera and tried again:

second shot w/ floor lamp at eye level

set-up for second shot

This set-up provided better subject isolation via lighting but the shadows seemed a bit harsh. I played around with a few combinations of settings and finally settled on 4 seconds at f/8 and ISO 100 but was still not happy with the results.

Recalling some studio shots that I did not long ago where I held a shaded lamp directly above my subjects, I decided to try holding the lamp above the centerpiece just out of the frame. I also turned off all the lights in the living room and opened the glass doors on the china cabinet behind the arrangement to eliminate the reflection of the lamp. Finally, I lit the candles to add another level of detail and ambiance to the shot.

set-up for final shot

This set-up is what I used for the final shot. (Note use of lens hood to quell flare). I sped up the ISO to 200 to get a 1.6 second exposure at f/8. This was mainly because the lamp was a bit heavy to be holding up like this for 6 seconds but also because a shorter exposure helped cut down on the ambient light bleeding in to the background. While the shutter was open I slowly arced the lamp from left to right to paint the entire arrangement and blur the shadows. The resulting image (top) ended up with shadows that were much softer at the subject with a nice gradual fall off of the light into the background. I couldn’t have done much better with an actual soft box in a studio ;-)

With a nice looking exposure I pulled the image into Lightroom to adjust the white balance (2625K) and apply my standard Sharpness (14), Detail (51), Clarity (30), and Vibrance (+25) settings. I also pushed the Recovery up to 73 to help correct some over exposure of the reds and knock back the highlights on the shiny green leaves a bit. A bit of final cropping (always leave room for cropping!) and off the image went to my father in-law.

Flushed

ISO 200, 50mm, f/1.7, 1/60sec, IS on

ISO 200, 50mm, f/1.7, 1/60sec, +2 EV, IS on

It’s quick and easy to get studio quality lighting in your home with almost no additional expense. Here’s a quick look behind the scenes of this photo:

set up

As you can see, all I did was set up a couple of white boards on the kitchen counter under a fluorescent light. I learned this trick when I was Design Director at Griffin Technology. Most of the pre-2007 product shots were done this way on a cubicle desk using the fluorescent light under the overhead storage bin. I’m happy to say that today Griffin employs a professional photographer and has a full photo studio.

For this shot I dialed in +2 EV exposure compensation to adjust for the all-white background. By shooting RAW I was able to simply click the white balance eye dropper tool in Lightroom on the white background to dial out the color cast of the fluorescent light. I pushed up the exposure an additional +0.83 to get the high key look I was going for. Other than that, all I did was tweak the Vibrance a touch and added a bit of sharpening.

Here’s another composition using the same set up:

wine shot 2

By the way, the subject of these photos is the wonderful Corbières Domaine De Fontsainte Gris de Gris 2007 rosé imported by Kermit Lynch. This is one of my absolute favorite wines. It has a unique combination of dryness and intense fruit flavors. I picked it up for less than $10 at Kroger. Real men drink rosé ;-)

About

I'm an industrial designer and an avid hobbyist photographer. People are always asking me "how'd you do that?" So, I decided to create this site as a place to share my experiences and insights about photography, the gear and what it all means to me. I'm not sure if this site will make anyone besides myself a better photographer but I figure it's worth a try. Take a look around and let me know what you think. Thanks for stopping by!

Subscribe

Recent Posts

Categories

Pages

Flickr Friends

Links

My Sites

Archives