After shooting digital for 10 years I finally started shooting RAW exclusively in September 2008. What took me so long? Probably the same thing that keeps most amateur photographers from shooting RAW: the added time and complexity of post-processing RAW images. That all changed when I discovered Adobe Photoshop Lightroom’s customizable default development settings. By creating a custom set of image adjustments I get Lightroom to do most of the work for me as I import my images. I often refer to my “default import settings” in my blog posts so I figured I should share what those settings are. Here are the settings that I have found that work best for me and my Pentax K10D in Lightroom v1.4 and make shooting RAW work so well for me:In order to create a set of custom develop settings you should start with Adobe’s default settings. To do so, select an image, enter the Develop Module and simply click on “Develop” in the menu bar then select “Set Default Settings…”

When the dialog box appears select “Restore Adobe Default Settings.” You will need to do this for each camera you use with Lightroom. To do so, simply find images shot with each camera and repeat this process (use the Metadata Browser in Library mode to find images shot with specific cameras). Obviously, don’t do this if you have previously saved custom develop settings you want to keep :-/

Once you have established a baseline for your develop settings it’s time to apply the adjustments you wish to make to ALL future images you import into Lightroom. I emphasized “all” because these settings should only serve as the basic image parameters you start with. Keep in mind that RAW files imported into LR do not retain any of the custom image settings that you apply in-camera (ie: sharpness, saturation, contrast, etc.). To automatically apply in-camera settings to your RAW files at import I’m pretty sure you have to use your camera manufacturer’s proprietary RAW software. Personally, I’d rather not be futzing with in-camera image parameter settings while I’m shooting and instead focus my time and attention on focus, composition and exposure. By creating this baseline default development setting you’ll only have to spend time adjusting white balance and applying creative effects.

The first area to adjust are the Basic settings. Be sure to leave the white balance (WB) default set to “As Shot.” Otherwise, LR will override your in-camera “auto” setting to whatever you select here (you are shooting in auto WB, right?). Once you have imported images adjusting white balance shot-to-shot will be one of the few things you will have to do. Of course the WB eyedropper makes this quick and easy and you can efficiently copy and paste settings to entire batches of photos shot in the same light. Sure beats having an entire batch of JPEGs shot at the wrong setting ;-)

Next, I like to dial in a bit of Clarity. I can’t really say what Clarity does but it seems to help define edges and brings out subtle details and gives images more depth. Too much Clarity can create distracting dark halos around edges much in the same way an over-processed HDR image does.

I also like to bump the Vibrance slider up a tad to make the color pop a bit more. I prefer using the Vibrance slider over the Saturation slider as Vibrance seems to be more subtle and does not blow out highlights as bad as Saturation does. This is a highly personal setting as many people prefer more neutral (say: “flat”) color. For me, I like my colors to pop. +25 is my baseline setting. I often go much higher :D

The only thing I do with the Tone Curve adjustment pane is to set the Point Curve to “Medium Contrast.” This seems to give the best overall balance to my images. Any other adjustments I make here are done on a case-by-case basis.

No default changes here. I only use the HSL / Color / Grayscale sliders to tweak specific areas of specific images (mostly to make a specific color pop or to tone map grayscale images).

Again, no default changes here. Thus far in my Lightroom usage the only thing I use Split Toning for is to warm up the occasional B&W image.

I do make a few changes to the Detail settings. I generally like my images to be sharp. However, I hate the look of “sharpened” images. I have found that dialing in a moderate amount of Sharpening at a relatively small radius gives the right look. A handful of Detail does just what you’d expect- pops detail- without over sharpening the overall image.

In my experience, all lenses impart some kind of CAs to images. Unfortunately, they don’t all do it in the same way at all times. The only default setting I have found that works well is setting the Defringe to All Edges. I like to use the Lens Corrections pane to add vignetting to some of my images for creative effect. However, I don’t always do this so I leave the Vignetting settings alone for my default settings.

I don’t know much about what is going on here. Logic would dictate that the specific camera model setting (Pentax 1.00 in my case) would be the way to go. However, my images are all jacked up if I use anything other than ACR 4.4. I’m sure that there’s some pretty useful fine tuning that can be done here but I just keep it on ACR 4.4 and close this pane so I’m not tempted to mess with it ;-)

Now, simply go back to “Develop”–>”Set Default Settings…” and this time select”Update to Current Settings.”

Now the next time you import a batch of RAW images Lightroom will apply your custom develop settings as the default baseline. This will keep you from having to hit every adjustment pane for every image- freeing you up to focus more on composition and creativity while still giving you the most control possible over your images!

Pentax K10D, Pentax SMC-A 50mm f/1.7 (manual focus), ISO 100, f/8, 30 sec, +/-0 EV, IS off

Taken in an alley behind an apartment building on Historic Highland Avenue in Birmingham, AL. I was drawn to the combination of lighting (sodium vapor and mercury vapor), the texture of the brick and the arrangement of the trash cans. This photo was taken with my Pentax K10D and my old manual focus 50mm f/1.7 lens on a Joby Gorillapod. I set the camera to manual mode, selected ISO 100 (for minimum noise), Auto white balance, 30 second shutter (maximum shutter time in manual mode), f/8 aperture (for maximum sharpness), and set the self timer to the 2 second delay position (to eliminate camera shake when the shutter opens). I manually set the focus at infinity and didn’t bother checking the light meter reading. Since I shoot these shots with the long exposure noise reduction turned off, I was able to review the shot immediately and saw that it was good on the first try. The alley was a lot darker and creepier than this photo suggests so after one shot I grabbed up my camera and kept moving…

Once back home, I dumped my RAW files into Adobe Lightroom where I sorted through my shots and selected this one to post. I played around a bit with the white balance but found the as-shot auto setting did the best job of capturing the variability of the two competing light sources. I bumped up the exposure a bit to brighten the shot. This was easy to do without introducing too much noise since I had taken the shot at ISO 100 (which gives more leeway for adjustments in post-processing). Had I shot at ISO 400 or above I would have had to make sure I got the exposure right in-camera as any tweaking would have introduced too much noise.

Here’s the same shot with the white balance adjusted to compensate for the orange cast of the sodium vapor lighting in the alley (I clicked the WB eye dropper on the neutral colored stone work on the brick wall in the foreground):

I use this technique a lot for long exposure urban night shots. Usually I only adjust the aperture between f/4 to f/16 or so to dial in the exposure for varying lighting conditions. Using a Gorillapod means I can easily carry the whole rig around and set it on sidewalks, streets, walls, etc. or quickly wrap it around a railing or sign post. I like to keep moving with a purposeful walk. Anyone I encounter on the streets I look square in the eyes and greet confidently. This tends to discourage too much unwanted conversation and draws attention away from my fancy camera. Using my little 50mm lens also helps to make the camera seem less significant to anyone that might be having unscrupulous thoughts.

Here are a few more photos from last night shot using the same technique:

Nothing really amazing here but I only spent about 10 minutes walking around this one block and snapping about a half dozen or so exposures. Using the same technique I’ve gotten much better results with not much more effort by just scouting better locations. Practice like this then when you come across those great scenes you’ll be ready to go with a minimum of fumbling around!

In-camera noise reduction is pretty critical for shooting JPEGs. Sure, you can always shoot your own series of dark frames at different ISOs and use them with 3rd party software to remove hot spots, etc. but this seems a bit extreme. So, I have just left the in-camera NR on and lived with the dark frame subtraction double exposure.

Many times I’ve noticed that there are hot spots in the initial Adobe Lightroom previews of my long exposure RAW files that disappear the first time I zoom in to 100%. This got me to thinking that maybe Lightroom could take care of long exposure noise on its own without the camera’s help. After searching Google in vain for a definitive answer, I decided a quick test was in order. I was pleased to learn that, now that I am shooting exclusively in RAW, I can turn off the in-camera noise reduction on my K10D and eliminate the wait between long exposure shots. (In-camera NR is still recommended for JPEG shooting).

Here’s what I found in the test. All shots are 30 seconds at f/16 and ISO 400 using my 50mm f/1.7 SMC-A lens with only LR’s default processing applied. Sorry for the crude composition…

JPEG with NR OFF

100% crop of JPEG w/ NR OFF

RAW with NR ON

100% crop of RAW w/ NR ON

RAW with NR OFF

100% crop of RAW w/ NR OFF

From what I could tell from this test, there is virtually no difference in noise between the RAW images with and without in-camera noise reduction. In fact, to me the images without the NR has slightly better contrast and more shadow detail. Keep in mind that these are unprocessed RAW files so I could easily get similar contrast and saturation as the JPEG image while maintaining the greater detail and dynamic range of the RAW images.

The only thing missing is any mention of what to do for night parades. A lot of Christmas parades are at night with the only lighting coming from the holiday decorations. Here a fast lens (f/2.8 or better) is a must have. Also, shooting wider angle shots can help reduce motion blur at slower shutter speeds. It goes without saying that you will have to bump your ISO up to get hand-holdable shutter speeds. Finally, don’t be afraid to brace up against a light pole and get some long exposure motion blurred shots!

My father in-law asked me to take a picture of his Christmas table centerpiece arrangement so he could e-mail it to an out of town friend. My attempt at a quick snapshot didn’t meet my with my photographic standards so I spent the next hour playing with lighting to get the final shot above. This was a very challenging shot as I had to make do with what lighting I could find in the house. Here’s how I did it:

First of all, my in-laws’ house is DARK. Dark walls. Dark floors. Dark furniture. Dark lamps. You get the idea. Plus, it was night so the wall of windows to the left of the subject weren’t helping. Of course, I could have waited for morning but I always like a good challenge. Plus, I figured that if I got it right, a night shot would better capture the elegant and rich warmth of the table setting.

My first test shot was attampted with nothing but the incandescent  lamp light filtering in from the living room behind the camera. This required a 6 second exposure at f/8 and ISO 400 (a tripod was used so my K10D’s IS was OFF). I used f/8 to ensure that the entire arrangement was in sharp focus while the background was blurred a bit. I like the f/8 shot because there is enough background detail to clearly place this shot in my in-laws dining room while the subject focus was nicely isolated. The lighting in this first shot was too flat. I wanted more subject isolation so I grabbed a floor lamp and placed it to the left of the camera and tried again:

This set-up provided better subject isolation via lighting but the shadows seemed a bit harsh. I played around with a few combinations of settings and finally settled on 4 seconds at f/8 and ISO 100 but was still not happy with the results.

Recalling some studio shots that I did not long ago where I held a shaded lamp directly above my subjects, I decided to try holding the lamp above the centerpiece just out of the frame. I also turned off all the lights in the living room and opened the glass doors on the china cabinet behind the arrangement to eliminate the reflection of the lamp. Finally, I lit the candles to add another level of detail and ambiance to the shot.

This set-up is what I used for the final shot. (Note use of lens hood to quell flare). I sped up the ISO to 200 to get a 1.6 second exposure at f/8. This was mainly because the lamp was a bit heavy to be holding up like this for 6 seconds but also because a shorter exposure helped cut down on the ambient light bleeding in to the background. While the shutter was open I slowly arced the lamp from left to right to paint the entire arrangement and blur the shadows. The resulting image (top) ended up with shadows that were much softer at the subject with a nice gradual fall off of the light into the background. I couldn’t have done much better with an actual soft box in a studio ;-)

With a nice looking exposure I pulled the image into Lightroom to adjust the white balance (2625K) and apply my standard Sharpness (14), Detail (51), Clarity (30), and Vibrance (+25) settings. I also pushed the Recovery up to 73 to help correct some over exposure of the reds and knock back the highlights on the shiny green leaves a bit. A bit of final cropping (always leave room for cropping!) and off the image went to my father in-law.

There are few things more beautiful than a good sunset or sunrise photograph. However, if you’ve ever tried to do it you know it can be frustrating. How many times have you seen a beautiful sunset like the one above only to have your photo turn out something like this?

There are a couple of easy things you can do to get great sunset photos. First, turn off your flash. The only thing the flash is good for during a sunset is to add fill to illuminate a foreground subject. Unfortunately, getting the right mix of fill flash and background exposure can be very tricky:

Not a very inspiring photo (though after the number of rum punches I had I didn’t care). For now, let’s just turn the flash off and focus on capturing a brilliant sunset photo.

Next, set your white balance to auto. You can also try daylight but I have always found the auto setting gives the best mix of deep blues, pinks, reds and oranges.

I like to shoot sunsets with a wide angle lens to get as much of the sky in the picture as possible. This ensures a full mix of colors from the darkest indigo blues overhead to the brightest pinks and oranges at the horizon. Usually I leave only a strip of ground/foreground across the bottom to anchor the photo- letting the sky dominate the scene for maximum impact.

The main challenge with sunset photos is getting around the camera’s matrix metering’s natural tendency to balance exposure across the frame. The camera doesn’t know what’s going on and tries to balance the dark foreground with the bright background. The washed out example at the top is what you get when you just point-n-click. To get a decent sunset exposure you either need to dial in some negative exposure compensation (usually -2/3EV to -1EV). An easier method is to just aim the camera at an unobstructed portion of the sky, focus, lock exposure, recompose, and shoot. I typically use a little of both.

For the best sunset photos I typically like to wait for the sun to be fully below the horizon. That beautiful glowing orange ball of the sun absolutely wrecks exposure on a camera and typically results in pretty disappointing shots. Also, some cloud texture in the sky helps provide a good mix of colors. Be sure to look behind you as many times clouds away from the setting sun pick up some awesome colors. Finally, some good foreground silhouettes can help add additional visual interest (especially helpful if the sky itself is not as dramatic as it could be).

A medium aperture like f/8-f/10 is best to ensure the best detail and sharpness across the frame and eliminate vignetting typical at larger apertures when shooting at a wide zoom setting. Since I generally like to wait for the sun to drop fully, there’s typically not very much ambient light. This means I either need to be shooting on a tripod at a low ISO and slow shutter speed or bump the ISO up to prevent camera shake. These samples were all shot hand-held at ISO 200-400 and f/8 and f/10 at around 1/4 second. The combination of the K10D’s in-body IS and the wide focal length meant it only took a few tries to get sharp shots (wider zoom angles can be hand held at slower shutter speeds than longer ones).

Typically a properly shot sunset photo doesn’t require much post-processing. Since I shoot everything in RAW I have to tweak sharpness and saturation on all my photos in Lightroom. I can also play around with the white balance a bit to get the best pop from my images- though the as-shot (Auto) setting worked best for these images. Often I find the fluorescent WB preset works well for sunsets for some reason.

While a DSLR gives the most control over all of these settings, I have gotten wonderful sunset photos with a pocket camera by simply turning off the flash and using the focus, recompose and shoot method. Here is a collection of some of my other sunset photos on Flickr.

The most difficult part about getting good sunset shots is being at the right place at the right time with your camera. I hope this helps you get that great shot the next time that happens!

ISO 200, 50mm, f/1.7, 1/60sec, +2 EV, IS on

It’s quick and easy to get studio quality lighting in your home with almost no additional expense. Here’s a quick look behind the scenes of this photo:

As you can see, all I did was set up a couple of white boards on the kitchen counter under a fluorescent light. I learned this trick when I was Design Director at Griffin Technology. Most of the pre-2007 product shots were done this way on a cubicle desk using the fluorescent light under the overhead storage bin. I’m happy to say that today Griffin employs a professional photographer and has a full photo studio.

For this shot I dialed in +2 EV exposure compensation to adjust for the all-white background. By shooting RAW I was able to simply click the white balance eye dropper tool in Lightroom on the white background to dial out the color cast of the fluorescent light. I pushed up the exposure an additional +0.83 to get the high key look I was going for. Other than that, all I did was tweak the Vibrance a touch and added a bit of sharpening.

Here’s another composition using the same set up:

By the way, the subject of these photos is the wonderful Corbières Domaine De Fontsainte Gris de Gris 2007 rosé imported by Kermit Lynch. This is one of my absolute favorite wines. It has a unique combination of dryness and intense fruit flavors. I picked it up for less than $10 at Kroger. Real men drink rosé ;-)